What to use inside a vinyl figure?

Discussion in 'Whatever' started by Kingboy D, Mar 28, 2014.

  1. Kingboy D

    Kingboy D Comment King

    Joined:
    May 6, 2008
    Messages:
    1,071
    Location:
    Sunny South Florida
    Name:
    Myles
    What to use inside a vinyl figure?
    I have a vinyl figure that is not restoring to natural shape after heating. I wanted to simply put something inside to help it keep its correct shape, but I am afraid of having the material react with the vinyl, as I've see rubber and styrofoam do. Does anyone have any experience with this, or suggestions that might be safe? Thanks in advance.
     
  2. Mr. Humphreys

    Mr. Humphreys Mini Boss

    Joined:
    Feb 28, 2008
    Messages:
    4,318
    Location:
    Land of Plush
    What to use inside a vinyl figure?
    Plain old sand? :razz:
    The clean quartz sand you can get at a pet store that sells aquarium stuff (natural color).
     
  3. Lixx

    Lixx Mr. Grumpy™

    Joined:
    Oct 9, 2007
    Messages:
    8,211
    Location:
    Not here
    flickr:
    lixx
    What to use inside a vinyl figure?
    I stuffed newspaper in a toy once and it did the trick.
     
  4. Purple Bat

    Purple Bat Addicted

    Joined:
    May 22, 2012
    Messages:
    883
    Location:
    US Mid-Southwest
    Name:
    John
    What to use inside a vinyl figure?
    Kingboy, did you want a short term solution or a long term one?
     
  5. mondocoyote

    mondocoyote Comment King

    Joined:
    Jun 5, 2006
    Messages:
    1,273
    Location:
    Chigasaki, Japan
    Name:
    Brian
    flickr:
    bbunting
    Instagram:
    thegalaxypeople
    What to use inside a vinyl figure?
    just wondering, how high is the heat you are appying to the figure?
     
  6. Waterbear

    Waterbear Line of Credit

    Joined:
    Apr 24, 2013
    Messages:
    1,587
    Location:
    Hiding in your toy chest
    What to use inside a vinyl figure?
    I've messed up resin toys with ink from newspaper before so i'd avoid that. Plain brown paper should be fine though.
     
  7. Lixx

    Lixx Mr. Grumpy™

    Joined:
    Oct 9, 2007
    Messages:
    8,211
    Location:
    Not here
    flickr:
    lixx
    What to use inside a vinyl figure?
    Actually it was just plain packing paper I don't know why I said newspaper. Probably because I remember pulling it right out of the box the toy came in and fixing the problem, but what do people normally pack with? Newspaper.

    Anyhow if it's a vinyl toy I doubt it would make a difference. Resin is soluble to the oils in newspaper ink, hence why your toy was messed up. Unless your Tetrahydrofuran it's not going to mess up your vinyl toy.
     
  8. Kingboy D

    Kingboy D Comment King

    Joined:
    May 6, 2008
    Messages:
    1,071
    Location:
    Sunny South Florida
    Name:
    Myles
    What to use inside a vinyl figure?
    Thanks for the suggestions.

    I want a long-term solution. And in terms of heat, I used a blow dryer for a bit of time. I know some people swear by near-boiling water, but I never tried that. Maybe it would work better.

    Not sure about sand - I don't want it too heavy. And I was considering paper, but I thought it would make crinkling sound every time I handled it. I really prefer something that would be essentially undetectable, like a foam/sponge-like substance. But in truth, I will rarely ever handle it once it goes up on the shelf, so paper is probably fine.
     
  9. mondocoyote

    mondocoyote Comment King

    Joined:
    Jun 5, 2006
    Messages:
    1,273
    Location:
    Chigasaki, Japan
    Name:
    Brian
    flickr:
    bbunting
    Instagram:
    thegalaxypeople
    What to use inside a vinyl figure?
    I had a couple of really badly warped figures, and used the hairdrier trick on them, but they tended to rewarp pretty soon after.

    Near-boiling water then a plunge into iced water was much more effective. The only negative point was that some of the metallic paints oxidised... a quick buff bought back the original colour though and the figures are still standing fine. That's just my personal experience, can't guarantee it will work for you. (that was a disclaimer, in case you were wondering!)
     
  10. ultrakaiju

    ultrakaiju Die-Cast Staff Member

    Joined:
    Jan 14, 2011
    Messages:
    11,771
    What to use inside a vinyl figure?
    Although I have read that some people use the high heat followed by a rapid quench before, as a general recommendation - not necessarily for this thread discussion - let me just say that I would avoid this simply from a materials point of view. As soft as vinyl can be, that is some harsh treatment you are putting it though, and despite what you may commonly think of from clips of blacksmithing, is not a good method even for annealing most metals. Slow, gentle cooling is far better to allow the material to set and avoid fracture. Not saying that this would necessarily happen to your toys, you might even get away with it a few times over, but strictly speaking if you are patient and can wait/hold and set the figure, there is no advantage to rapid quenching.
     
  11. Waiting...

    Waiting... Comment King

    Joined:
    Nov 10, 2009
    Messages:
    1,337
    Location:
    Cleveland Ohio
    Name:
    Thomas
    What to use inside a vinyl figure?
    You should have no reaction with a can of expanda foam, they used that stuff to make the old 3 foot store display sofbi more solid and I have never seen one show damage due to that, but I would cross reference any odd chemicals they may have listed as an ingredient as the formulas have likely changed over the years.
     
  12. Art-Whore

    Art-Whore Addicted

    Joined:
    Feb 22, 2013
    Messages:
    783
    Location:
    ConvictTown
    Name:
    Josh
    Instagram:
    artwhorecult
    What to use inside a vinyl figure?
    ...Man that is a GREAT question.

    Personally i have worked out 2 options for getting toys to stand/fix up shape issues:

    1) easy - add rice to weigh down the bottom/fill out the toy

    (rice is non reactive, lasts for millenia/is archival and is damn cheap and easy to find)

    2) hard - add a stand. THEN add magnets to the stand, and to the bottom of the toy.

    (only issue with this is the toy will always need to be on it's stand)
     

Share This Page